A home can receive an improved EPC rating without its occupants noticing any significant change in comfort. The conversion factor for electricity from final to primary energy is set to fall from 1.9 to 1.7 on 1 January 2027, moving some electrically heated homes into a better rating band without any work being done to the building itself.
Distinguishing regulatory improvements from real gains in indoor temperature, air quality and energy bills is the key challenge in a home renovation. This article compares the indicators that matter when measuring lasting comfort after renovation work.
EPC rating and perceived comfort: what the figures really measure
An EPC assesses two factors: primary energy consumption and greenhouse gas emissions. It says nothing about the surface temperature of walls, draughts or indoor humidity levels. Two homes with a D rating can feel radically different depending on the condition of their ventilation and the quality of insulation on their solid walls.
The table below summarises the differences between what an EPC captures and what occupants experience day to day.
| Criterion | Included in the EPC | Direct impact on perceived comfort |
|---|---|---|
| Overall energy consumption | Yes | Indirect (bills) |
| Surface temperature of walls and other building elements | No | High (feeling of cold walls) |
| Indoor humidity level | No | High (hygrothermal comfort) |
| Air exchange | Partially (air permeability) | High (air quality, health) |
| Protection against summer heat | Partially (Bbio indicator) | High (summer comfort) |
| CO₂ emissions | Yes | No direct effect on perceived comfort |
This gap explains why a renovation project focused solely on achieving a better rating can disappoint. Professionals specialising in home design and renovation take these factors into account from the outset. Resources are available at https://www.concept-habitat.fr to help you understand this holistic approach.

Thermal insulation and ventilation: the two measures that make a difference to everyday comfort
Insulation reduces energy bills, but eliminating cold surfaces is what transforms the feeling of comfort. A poorly insulated wall whose surface temperature falls several degrees below the room temperature creates a noticeable thermal imbalance, even when the heating is on. The occupant turns up the thermostat without solving the problem.
Insulating solid walls and other opaque surfaces before replacing the heating system is the logical order of priority. An efficient heating system in a poorly insulated home is like heating the outdoors.
Ventilation and indoor air quality
Improved airtightness resulting from insulation eliminates unwanted draughts. In return, it requires a properly sized mechanical ventilation system. Without sufficient air exchange, humidity builds up, indoor pollutants (VOCs, CO₂) linger and mould appears.
To maintain a humidity level between 45% and 55%, ventilation must extract stale air from wet rooms and bring fresh air into dry rooms. A humidity-controlled single-flow mechanical ventilation system adjusts the airflow according to ambient humidity, while a double-flow system recovers some of the heat from the extracted air.
Checking that the ventilation system is working properly after renovation is a simple but often overlooked step: a sheet of paper held in front of an extraction vent should stay in place. If it falls, the airflow is insufficient.
Energy renovation regulations: plan ahead rather than be caught out
Home renovation takes place within a regulatory framework that is gradually becoming stricter. Landlords who ignore the timetable risk being prohibited from renting out their properties.
- Since 1 January 2025, homes with an EPC rating of G can no longer be offered for rent as they fail to meet energy-efficiency standards.
- Homes with an F rating will be subject to this ban in 2028.
- Those with an E rating will follow in 2034.
This timetable encourages homeowners to plan a whole-home renovation rather than carry out isolated improvements. Replacing a boiler without upgrading insulation, then insulating the loft two years later, generally costs more than coordinating the work and can limit access to the most advantageous grants, which increasingly prioritise major renovations and decarbonisation.
Financing the remaining costs
Public grants (whose eligibility rules change regularly) never cover the full cost. Planning for the remaining costs before starting work helps avoid unpleasant surprises. An interest-free eco-loan can provide additional funding, but the amount depends on the type of work undertaken. Comparing the total project cost, available grants and loan repayments is an essential step before choosing materials or a contractor.

Measuring comfort after renovation: practical indicators to track
Once the work is complete, how can you tell whether comfort has really improved? Three simple indicators are enough to assess the situation without expensive equipment.
- The thermostat setting needed to feel comfortable: if it drops by one or two degrees after insulation, that is a real improvement, because the walls no longer cool the room.
- The energy bill over a full heating season, compared with the previous season under similar weather conditions.
- No condensation on windows or in room corners, indicating effective ventilation and insulation without major thermal bridges.
An improved EPC rating without a lower thermostat setting indicates a theoretical gain, not an improvement in comfort. The official rating remains a useful benchmark for the property’s value and compliance with rental requirements, but it cannot replace direct observation of living conditions after the work is complete.
The choice of materials (bio-based or conventional) affects the project’s durability and environmental footprint. Their inherent thermal performance matters less than the quality of installation: a high-performance insulation material that is poorly fitted, with thermal bridges at the joints, will compromise the overall result. Careful installation is just as important to final comfort as the choice of material itself.
A comfortable, sustainable home is measured by how it feels to live in, not by the letter displayed on an administrative document. Tracking perceived temperature, monitoring humidity and comparing bills over a full year gives a far more reliable picture of a renovation project’s success.



